UK Usage Instructions

DIAGRAM KEY

BASE UNIT		HEADSET
1	Tx Slide Switch (A-D)	18	Microphone
2	Rx Slide Switch (1-4)	19	Speaker
3	Speak Volume Adjust UP	20	Talk Button
4	Speak Volume Adjust DOWN	21	Listen Volume Adjust UP/DOWN
5	IntelliStandTM Switch ON/OFF	22	Headset Mute Switch
6	Configuration Dial	23	On-line Indicator
7	AC Power Adapter	24	Charge contacts
8	AC Power Adapter Port	25	Battery Door

9Handset Cable Port

10Telephone Cable Port

11Accessory Port

12Headset Docking Cradle

13Charge contacts

14Charge Indicator

15Talk Indicator

16Power Indicator

17Handset Lifter (Optional)

IMPORTANT SAFETY INFORMATION

Please read the following instructions before use:

General:

•Operating temperature +4C to +49C

•Storage temperature +4C to +49C

•The product is suitable for indoor use only

•To reduce the risk of electric shock, explosion or fire:

•Use only the AC power adapter supplied – part number 61634-02 (Euro) or 61635-02 (UK)

•Ensure that the voltage rating (e.g. 230V 50Hz) corresponds to the local mains supply you intend to use

•Use only the correct battery type – part number – 62346-01

•Do not disassemble the product

•Keep all products, cords and cables away from operating machinery

•Avoid contact with liquids

•Connect the base unit only to a host terminal port explicitly designated for use with handsets or headsets. Connection through other ports, such as data ports or line ports, may damage the product and could constitute a fire hazard. If in doubt, please contact your supplier or the supplier of the host equipment

•If mains power fails, the base unit will switch to handset mode

Battery Safety:

•Please observe these precautions to ensure continued safety. Misuse or mistreatment may result in fire, explosion or the release of corrosive chemicals

•Battery storage temperature +4C to +49C

•Battery operating temperature +4C to +49C