Pairing your Bluetooth USB Adapter
Initial Pairing
Your Bluetooth USB adapter comes
To Re-Pair your Bluetooth USB Adapter
In the event that your headset and Bluetooth USB adapter are not paired or become unpaired do the following:
1Start with the headset powered off.
2Remove the Bluetooth USB Adapter.
3Place the headset in pairing mode by pressing and holding the power button until the headset LED flashes BLUE/RED.
4Insert Bluetooth USB adapter directly into your PC USB port. The LED will flash and then turn solid blue to indicate the headset is connected to the Bluetooth USB Adapter.
5Headset will exit pairing mode.
Auto Pair
The Bluetooth USB adapter and the headsed will automatically pair headset to mobile phone and PC when headset is on and within range of devices. Voice prompt will announce you are connected. Voice prompts will also prompt you when you are out of range of devices.
10