Getting Started

Handset Battery Charging

1.Place the handset in the base. The CHARGE LED on the base will light RED.

2.After the batteries are fully charged, check for dial tone by pressing TALK on the handset.

3.When the handset battery gets low, there will be two (2) beeps every thirty (30) seconds and the TALK button will flash. If the battery becomes low while you are on a call, you will be disconnected after about two (2) minutes. Terminate the call and recharge the battery.

4.To recharge the battery pack, place the handset in the base.

NOTE:

1.Make sure the contact points are touching and the CHARGE LED is lit.

2.Be careful not to short battery with conducting materials such as rings, bracelets and keys.

Battery Life

1.Talk Time: 4 hours

Standby: 8 days without usage

2.Actual amounts will vary depending on usage and amplifier settings used.