Getting Started |
|
| E | |
|
|
| ||
4. Plug the adapter into a standard |
|
| N | |
|
| G | ||
120v AC power (electrical) outlet. |
|
| ||
|
| L | ||
| BATTERY |
| ||
5. Lift the base’s antenna to a | CONNECTOR |
| I | |
|
| |||
vertical position. | BATTERY | BATTERY | S | |
| COMPARTMENT | H | ||
| PACK PLUG | |||
6. Set the PULSE/TONE switch located | COVER | |||
| ||||
|
|
| ||
on the back of the base to correct |
|
|
| |
dialing mode. Please check with your |
|
|
| |
local Phone Company if uncertain of | BATTERY |
|
| |
the type of service. |
|
|
|
7.Place handset in the cradle to begin initial charging.
Remember, you must charge the phone for at least 12 hours before you use the phone for the first time.
Diagram A: Installing and Connecting Batteries
The battery in the handset must be fully charged for 12 hours before using the telephone for the first time.
To Install a New Battery
Battery Installation
The Clarity 435 uses a 3.6Volt 600mAh NiMH rechargeable 3 cell battery (AAA) that is included with your unit.
HANDSET BATTERY MUST BE CONNECTED BEFORE BEGINNING INITIAL CHARGING.
To Connect Battery:
1.Remove battery cover
2.Install new battery
3.Connect battery pack
4.Replace battery cover
5.Charge for 12 hours before first use
Remove battery compartment cover and connect battery pack plug into the battery connector as shown in Diagram A.
9