Getting Started
Connecting Your Telephone
Carefully remove your cordless telephone from it’s box. If there is any visible damage, do not attempt to operate this equipment. Return it to the place of purchase.
Check to be sure that you have all items that come with your telephone. You should have a HANDSET, BASE UNIT, AC ADAPTER, TELE- PHONE LINE CORD, BELT CLIP and OWNERS MANUAL. A BATTERY is also included and is located in the battery compartment.
If at any time you have questions about your telephone please contact our Customer Service Department at:
Choosing a Location
! | USE ONLY WITH CLASS |
|
| |
(CLASSE) 2 POWER SOURCE |
|
| ||
PULSE/TONE | BOOST | 9VDC |
| |
|
| ON/OFF | TEL | |
|
|
| 500mA | |
Always connect the AC Adapter to the
phone before you connect it to the AC power. When disconnecting the phone, disconnect the AC power before you disconnect it from the phone.
Installation
1.This phone requires a modular phone jack (RJ11) and a standard 120V AC wall outlet.
2.Plug the AC Adapter directly into outlet.
3.Do not plug other appliances into outlet or have outlet controlled by a wall switch.
4.Choose a location that is away from normal activities.
CAUTION: USE ONLY WITH CLASS 2 POWER SOURCE 9V DC, 500mA.
Follow these instructions to place the base on a desk or tabletop.
1.Plug one end of the supplied modular telephone line cord into the jack marked TEL located on the back of the telephone base.
2.Plug the modular telephone line cord’s other end into a modular phone jack.
3.Insert the supplied AC Adapter’s plug into the jack marked 9V DC 500mA located on the back of the telephone base.
8