Plantronics CS50/55 warranty Complete, Unplug the handset cord from phone, On the phone

Page 4

1	2	Base - Bottom View

Unplug the handset cord from phone.	Plug the phone cord that is connected to
	the CS50/CS55 base into the handset jack
	on the phone.

CAUTION: Your phone may have two similar jacks. Put the cord only in the jack from which the handset came.

Plug the handset cord into the handset jack in the base. Push in until it clicks.

Complete

Plug the AC charger into the base’s AC charging jack. Push in firmly.

Plug the handset cord into the handset jack in the bottom of the base.

See step 3A for detailed location.

NOTE: The access to the handset jack is fairly small. If you have large hands you may want to ask someone with smaller fingers to do this step.

Plug the AC charger into an outlet and into the base’s AC charging jack.

See step 4A for detailed location.

Image 4

Contents CS50/55 CS55 Headset Earloops HeadbandAC Charger Telephone Cord Base Top View Base Bottom ViewHeadset Handset LifterUnplug the handset cord from phone CompleteOn the phone Off Retaining Ring To first test proper set up of the handset lifter With Handset Lifter OptionalMinor Adjust Major Adjust Headset MuteCS55 CS50 Talking/Muted Green Charging AmberVolume major adjust switch setting. See Number is in line with the position indicator. SeeSelect another speaking volume major adjust setting as Headset lost subscription. Try to reset the system. SeePinch both sides of the battery cover Out by the wiresReconnect and install the new battery Reconnect System reset operation is completeRinger Microphone Extender ArmFor Nortel i2004 phones only

Related manuals

Manual 13 pages 31.85 Kb