Grandstream Networks GXP1100 Making Phone Calls, Calls with 1 SIP Account, Completing Calls

MAKING PHONE CALLS

2 CALLS WITH 1 SIP ACCOUNT

GXP1100/GXP1105 can support up to two lines “virtually” mapped to one SIP account. By picking up the handset, the GXP1100/GXP1105 will be in off hook state and the dial tone will be heard. To make a call, dial out the number with the current line.

During the call, users can press the FLASH key to hold the current call and make/answer another call. If they are 2 calls established, users can switch the two lines by pressing the FLASH key.

COMPLETING CALLS

The GXP1100/GXP1105 allows you to make phone calls after picking up the handset. There are four ways to complete calls.

•Dial. Enter the number and send out.

Take handset off hook. You shall hear dial tone from the handset;

Enter the number;

Press SEND key or # to dial out.

•Redial. Redial the last dialed number.

Take handset off hook. You shall hear dial tone from the handset;

Press SEND key.

•Speed Dial. Dial the number configured as Speed Dial on Multi Purpose Key.

Go to GXP1100/GXP1105 Web GUI->Basic Settings, configure the Multi-Purpose Key's Key Mode as Speed Dial. Enter the Name and User ID (the number to be dialed out) for the Multi-Purpose Key. Click on "Update" at the bottom of the Web GUI page;

Take handset off hook. You shall hear dial tone from the handset;

Press the configured Speed Dial key.

•Call Return. Dial the last answered call.

Go to GXP1100/GXP1105 Web GUI->Basic Settings, configure the Multi Purpose Key's Key Mode as Call Return. No Name or User ID has to be set on the Multi Purpose Key for Call Return;

Take handset off hook. You shall hear dial tone from the handset;

Press the configured Call Return key to dial out.

FIRMWARE VERSION 1.0.4.23 GXP1100/GXP1105 USER MANUAL Page 13 of 46