Use NAT IP
STUN Server
Firmware Upgrade and Provisioning
XML Config File Password
HTTP/HTTPS User Name
HTTP/HTTPS Password
Upgrade Via
Firmware Server Path
Config Server Path
Firmware File Prefix
Firmware File Postfix
Config File Prefix
Config File Postfix
Allow DHCP Option 43 and Option 66 Override Server
Automatic Upgrade
Authenticate Conf File
default setting is 20 seconds.
The NAT IP address used in SIP/SDP messages. This field is blank at the default settings. It should ONLY be used if it's required by your ITSP.
The IP address or Domain name of the STUN server. STUN resolution results are displayed in the STATUS page of the Web GUI. Only
Specifies how firmware upgrading and provisioning request to be sent: Always Check for New Firmware, Check New Firmware only when F/W pre/suffix changes, Always Skip the Firmware Check.
The password for encrypting the XML configuration file using OpenSSL. This is required for the phone to decrypt the encrypted XML configuration file.
The user name for the HTTP/HTTPS server.
The password for the HTTP/HTTPS server.
Allows users to choose the firmware upgrade method: TFTP, HTTP or
HTTPS.
Defines the server path for the firmware server. It could be different from the configuration server for provisioning.
Defines the server path for provisioning. It could be different from the firmware server for upgrading.
Enables your ITSP to lock firmware updates. If configured, only the firmware with the matching encrypted prefix will be downloaded and flashed into the phone.
Enables your ITSP to lock firmware updates. If configured, only the firmware with the matching encrypted postfix will be downloaded and flashed into the phone.
Enables your ITSP to lock configuration updates. If configured, only the configuration file with the matching encrypted prefix will be downloaded and flashed into the phone.
Enables your ITSP to lock configuration updates. If configured, only the configuration file with the matching encrypted postfix will be downloaded and flashed into the phone.
If DHCP option 66 is enabled on the LAN side, the TFTP server can be redirected. The default setting is "Yes".
Enables automatic upgrade and provisioning. The default setting is "No".
Authenticates configuration file before acceptance. The default setting is "No".
FIRMWARE VERSION 1.0.4.23 | GXP1100/GXP1105 USER MANUAL | Page 36 of 46 |