Cordless Internet Phone with Skype Model SPH200D User Manual
Registering Your Handset(s) with an Additional Base
Note: Make sure that you have configured the language, country code, and area code of you phone before registering extra handsets.
This section shows you how to register your handset to additional base units. If your handset displays Unregistered, see to “Registering Your Handset” on page
1.Press Menu>Settings>Handset>Register.
2.Enter the system PIN (Default: 0000). Press Clear to make corrections.
3.Press Enter to confirm. Your handset starts searching for the base.
4.Press on the base unit until the LED starts flashing.
Selecting a Base Unit
You can switch your handset between different base units if your handset has registered to these base units. You can set up the handset to automatically connect to the closest base unit. You can also set up the handset to only connect to a fixed base unit you have specified.
Note: Your handset must be registered to a base unit before you can select that base unit.
1.Press Menu>Settings>Handset>Base.
2.Scroll to the base unit that you want, or select Auto if you want your handset to automatically connect to the closet base unit.
3.Press Select.
The new setting is saved.
Deleting a Handset
Use one handset to delete
Settings and Maintenance |