Cordless Internet Phone with Skype Model SPH200D User Manual
•Reset All. Reset all the settings including the network settings.
•Keep Network. Reset all the settings except the network settings.
3.Enter the system PIN. Press Clear to make corrections.
4.Press Yes to confirm.
5.The settings will reset. Your handset’s power switches off. It will switch back on in a few seconds after updating all the settings.
Registering Your Handset
Registration lets your base unit and handsets communicate. Your handset must be linked to the base in order to make calls and to use many of features on the phone.
Your handset is already registered unless you have bought an extra handset individually, or you have
Note: Your base unit can register up to four handsets. After registering four handsets, your base unit registration memory is full. If you try to register an additional handset, the registration process will not complete.
Follow the steps below to register your handset.
1.Press Menu>Settings>Handset>Register.
2.Enter the system PIN (Default: 0000). Press Clear to make corrections.
3.Press Enter to confirm. Your handset starts searching for the base.
4.Press on the base unit until the LED starts flashing.
5.The handset registers to the particular base unit, and shows the signal icon .
Settings and Maintenance |