Menus
b. Store the number in the selected position, thus erasing the old number (and name). Press YES.
Card memory full
If you try to store a phone number when all positions are occupied, a position number in the Phone memory will be suggested in the top line of the display.
Both memories full
If both memories become full, no position number will be suggested,
If you do wish to store the phone number, you have to enter the number of an already occu- pied position, thus erasing the old number (and nam ).
To recall | phone number using the | ||
name – Name recall | |||
To recall | phone number using the | ||
position – Position recall | |||
To store~PHONEBOOKPositionStoreaameph enumber – Store | |||
| recall |
| |
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Storing phone numbers in the Card memory, and recalling phone numbers from the Card memory, is described in the Basic Guide.
If you wish to store a phone number in the Phone memory, press # to enter the ¤ charac- ter. For example, press # followed by 1 to store a phone number in memory position ¤1 . The same applies when you recall a phone number using Position recall.
The procedure for recalling a phone number using Name recall is the same, regardless of
press the 2Rkey. To recall a name beginning with E, press the 3 key twice.
whether the phone number is stored in the Card or Phone memory.
Alternative method to recall a phone number using the name
Press C Rtion:to erase any digits from the display.
Press L, followed by a numeric key and YES.
For example, recall a name beginning with A,
To ch nge a phone number, name or storagePHONEposiitBOOKion – Edit
Enter~FindPosthe PhDITposdbookmenu and select Edit.
If the name d splayed is not the desired one, scroll w th nameor L. 
a. Enter the position number and press YES. b. If you EDITwish to enterthe name, press R.
Enter01234567890Name:EDITtheABCfull name11and press YES.
You can now change the position number (in the top line), the name (in the middle line) or the phone number (in the bottom line). You can move the cursor to the desired line with R/L and then m ke the changes. Use the CLR key to erase. When you are finished, press YES.
If you did not change the position number, the message Used verwrite? is displayed, indi- cating that the edited name or phone number will be sto ed in its old position. Press YES.
To erase~ErasePHONEBOOKphonenumber – Erase
Enter the Phone book menu and select Erase.
34 | EN/LZT 126 1298 R1A |