Installation and Configuration
Connecting Access Points
Connecting Access Points
After you have installed and configured the controller, use
Note As soon as the controller is activated, it starts to scan for access points on all connected ports. When it detects an access point, it records its MAC address in its database. The Radio Resource Management (RRM) function then automatically configures the access point to start transmitting and start allowing clients to connect through the access points.
Figure 8 | Access Points Connected to a Controller |
Cisco Wireless
LAN Controller
Network
Cisco 1000
Access Points
142197
Where to Go from Here
You have completely installed the controller hardware.
•Register your controller.
•Refer to the Configuring the Cisco Wireless LAN Controllers in the Product Guide for more information on configuring the controller.
•Refer to the Product Guide for more information on configuring, operating, maintaining and troubleshooting the controller.
Cisco 4100 Series Wireless LAN Controllers - Installation and Configuration Guide
| 15 |
| |
|
|