Polk Audio 4000 manual HOW to Optimize the Sound When TV Speakers are on

Page 8

HOW TO OPTIMIZE THE SOUND

WHEN TV SPEAKERS ARE ON

You should hear sound from the bar. If you don’t, turn up the volume on the bar using its volume control buttons.

If your bar is connected to your TV, there’s a very good chance your TV speakers are also playing. It’s impossible to give specific instructions on how to turn off the speakers for every TV, but here’s a way to do it that covers many of the TVs out there.

1.On your TV remote control, find a “menu” or “setup” button.

2.Press this button. You should see an on-screen menu.

3.Next, look for an option to control audio functions and select it.

The setting to turn off your TV’s internal speakers should be here.

If you can’t turn off your TV internal speakers, don’t worry. Your SurroundBar 4000 IHT will make your TV sound much better.To enjoy the best performance from your bar, you’ll want it to play louder than your TV. Use the following steps to adjust the volume balance between your TV and the bar:

1.If necessary, program your bar to respond to the volume up and down control commands of your TV remote. (See “HOW TO SETUP A REMOTE CONTROL FOR YOUR SURROUNDBAR 4000 IHT” on this page.)

2.Turn your TV volume all the way down using the control buttons on your TV.

3.Then, using the volume control buttons on your bar, set the volume to a normal listening level (do not use the remote control).

After you make these adjustments, your SurroundBar 4000 IHT should always be louder than your TV speakers. Then use the TV remote control to adjust the volume as you normally do.

FINE TUNING YOUR SURROUNDBAR 4000 IHT

The next thing you’ll want to do is adjust the subwoofer

to blend with your bar. This will ensure the system produces the best sound.

To set the subwoofer’s volume, play a variety of source material— some music, a movie sound track with great special effects,

a movie chapter or a part of a concert in which people are speaking. Adjust the volume until what you hear sounds natural to you in your normal viewing location.

HOW TO SET UP A REMOTE CONTROL

FOR YOUR SURROUNDBAR 4000 IHT

Important Note: If adjusting your TV’s volume also adjusts the volume of your bar, then following the instructions below is not necessary. Your remote will control the SurroundBar 4000 IHT without programming.

Programming Instructions: Your SurroundBar 4000 IHT is currently programmed to respond to the remote control that is included with the product. However,we strongly recommend that you program the SurroundBar 4000 IHT to also respond to your existing remote control using the steps illustrated below thereby enabling you to operate everything using a single remote.

Example: To have your bar learn the “Volume Up” command of your remote control:

LED

LEARN

SOURCE

MUTE

 

 

 

 

 

 

 

 

12

VOL

3

1.Press and hold “LEARN” on the bar until the LED blinks orange.

2.Press “Volume Up” ( ). LED stops blinking and remains steady orange.

3.While holding your TV’s remote within 1-2 feet of the bar, quickly tap the “Volume Up” ( ) button approximately 4 times. With each tap the status LED should blink quickly (like a strobe). After the 4th button press

the status indicator LED should blink green for about 3 seconds.

Repeat steps 1-3 to program “Volume Down” (), Mute and Power buttons ( ).

Code Erasing Procedure: If you have programmed your SurroundBar 4000 to respond to a remote control and you no longer want it to do so, then you can erase the codes by pressing the LEARN key for about two seconds while the unit is in standby mode (power LED is red). You’llknow that previously learned codes have been successfully erased when the power LED blinks orange and red in succession. The SurroundBar 4000 will continue to respond to the provided credit card remote control.

NOTE: This procedure removes ALL of your bar’s remote control programming. If you only need to change the programming for some of the bar buttons, follow the three steps in the sequence previously described to redo any previous programming.

8

Polk Audio Customer Service 800-377-7655 (Outside USA & Canada: 410-358-3600)

Page 7 Page 9
Image 8
Page 7 Page 9
Contents English English Inside Your Surroundbar 4000 IHT Carton Please Take InventoryAbout Your Surroundbar 4000 IHT BAR Controls BAR LEDGreen Slow Blinking-System is muted Red and Orange Blinking-Learned IR codesRemote Control Power Connection-The subwoofer power cord connects hereSpecifications Subwoofer ControlsWhere to Locate Your BAR For the Best Sound Where to Locate Your Subwoofer for the Best SoundHOW to Connect Your BAR HOW to Connect Your SubwooferHOW to Optimize the Sound When TV Speakers are on Fine Tuning Your Surroundbar 4000 IHTTroubleshooting How do I erase previously learned remote control commands? To contact Customer ServiceWhat if my provided optical cable is too short? My audio sounds strange and distortedPolkcs@polkaudio.com Garantie Limitée

4000 specifications

Polk Audio has long been revered for its commitment to delivering high-fidelity audio at an accessible price point, and the Polk Audio 4000 is a prime example of this ethos. This speaker is a part of Polk's extensive lineup, known for blending advanced engineering with sleek design, making it a great addition to any home audio system.

One of the standout features of the Polk Audio 4000 is its Dynamic Balance technology. This innovation involves a unique cone material that reduces distortion while ensuring a smooth audio response across various frequencies. This means that whether you're listening to a quiet vocal track or an explosive movie scene, the Polk 4000 delivers clear and balanced sound without any coloration.

The design of the 4000 is both functional and aesthetic. With a sleek cabinet that minimizes resonance, the speaker is engineered to optimize sound performance while fitting seamlessly into modern home environments. The curved edges and classic finish make it an elegant choice for any decor, whether it be minimalist or more traditional.

In terms of connectivity, the Polk Audio 4000 boasts versatility, featuring binding post inputs that allow for secure connections to a variety of amplifiers and receivers. This makes it easy to integrate into existing home theater setups or stereo systems. Furthermore, this speaker is compatible with various audio sources, be it digital streaming or vinyl records, ensuring that all your listening needs are met.

Another notable feature is its wide dispersion technology, which enhances the spatial audio experience. This technology enables sound to be projected more evenly throughout the room, creating an immersive listening environment that makes you feel as though you're right in the center of the action.

Overall, the Polk Audio 4000 is built to provide an authentic audio experience that appeals to both casual listeners and audiophiles alike. With its combination of advanced technologies, elegant design, and versatile connectivity options, it stands out as an excellent choice for anyone looking to elevate their home audio experience. Whether you're watching movies, gaming, or enjoying your favorite music, the Polk Audio 4000 ensures that every sound is rendered beautifully, making it a worthwhile investment for sound enthusiasts.
Top Page Image Contents