Cooper Lighting V90229-1N Lampholder, Optical Accessory Retainer Ring Cover, Ceiling Line Snoot

Page 2

INSTALLATION INSTRUCTIONS

V90229-2

 

 

COMBOLIGHT

Avoid Fire or Electric Shock



R

LAMPHOLDER

 

 

 

 

Page 2 of 3

*Installation Instructions for qualified electricians only. *Install per National Electrical Code and local regulations. *Read Installation Instructions completely before installation. *Failure to follow Installation Instructions may void warranties.

THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.

11.Lamp installation:

To install LAMP, remove the COVER RING by pushing straight back on the COVER RING and then turning it counter-clockwiseto release. See Fig. 5.

12.Once removed, insert the properly-specified LAMP into the

BACK RING, ensure that the LAMP is the correct LAMP for the SOCKET or damage to the fixture or lamp may occur. The LAMP will seat into the COIL SPRING when installed properly. While holding the LAMP in place, grab the SOCKET ASSY and plug or screw the LAMP firmly into it.

See Fig. 6.

BACK RING

COVER

RING

COIL SPRING

Figure 5

SOCKET ASSY

BACK RING

PIVOT JOINT (FOR GIMBAL TIGHTENING)

LAMP

(MR16 shown, COIL SPRING behind)

Figure 6

(Cover Ring Removed)

OPTICAL

ACCESSORY

ACCESSORY

RETAINER

RING

COVER

RING

Figure 7

13.Optical Accessory: (skip to Step 21 if not using optical accessories) To install OPTICAL ACCESSORY pieces, remove the ACCESSORY RETAINER RING by unthreading until it is completely removed from the

COVER RING.

14.Install desired OPTICAL ACCESSORY pieces into the COVER RING and re-thread the ACCESSORY RETAINER RING firmly. See Fig. 7.

*The COVER RING can accommodate three (3) accessories without the ACCESSORY RETAINER RING or two (2) pieces with it.

*The ACCESSORY RETAINER RING may be used to lock the accessory. For example, a linear spread lens or cross baffle can be locked in-place into a desired orientation.

*Please note that not all accessories are compatible with each other and with all lamps.

CEILING

LINE

 

SNOOT

Flush Position

Regressed Position

Figure 8

15.Regressed Lamp Ring/Snoot: (skip to Step 19 if not regressing the lamp) The lamp ring may be installed in a regressed position only if a

SNOOT accessory is being used. See Fig. 8. If necessary, please see step 13 for instructions on SNOOT installation. To accomplish the regressed lamp ring position set the COVER RING aside. Remove the lamp ring assy by loosening the two (2) SET SCREWs in the GIMBAL BLOCKs.

16.Once loosened the lamp ring assy can be removed by grasping the GIMBAL RING and turning clockwise until it releases from the GIMBAL BLOCKs.

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Trimless Ceiling Line Snoot Optical Accessory Retainer Ring CoverLampholder Cover RingPIN Back Ring Bayonet Slots Cover AS InstalledGimbal Gimbal Ring Block Snoot Slot SET Screw Cover Ring

V90229-1N specifications

The Cooper Lighting V90229-1N is a versatile and reliable lighting solution designed to enhance both commercial and residential environments. Known for its excellent performance and energy efficiency, this fixture is well-suited for a variety of applications, including corridors, stairways, and areas requiring dependable illumination.

One of the standout features of the V90229-1N is its advanced LED technology. LEDs are known for their long lifespan, often exceeding 50,000 hours, which translates to less frequent replacements and reduced maintenance costs. This fixture not only meets but often exceeds the lighting requirements defined by various building codes, ensuring a safe and well-lit setting.

The design of the V90229-1N emphasizes both functionality and aesthetics. It boasts a sleek, low-profile construction that can seamlessly blend into any environment. The durable housing ensures that the fixture can withstand the rigors of daily use, making it an ideal choice for high-traffic areas.

Another noteworthy characteristic of the V90229-1N is its energy efficiency. By utilizing LED technology, this fixture consumes significantly less power compared to traditional incandescent or fluorescent lighting solutions. This not only contributes to lower energy bills but also aligns with modern sustainability practices, making it an eco-friendly choice for both homeowners and business operators.

The V90229-1N also incorporates smart dimming capabilities, allowing users to adjust the brightness according to their needs and preferences. This feature not only enhances the ambiance of a space but also further contributes to energy savings, as the light output can be reduced when full brightness is not necessary.

Installation is simplified with the V90229-1N, as it is designed for easy mounting and can be integrated into existing electrical systems without the need for extensive modifications. This adaptability makes it a suitable option for both new constructions and retrofitting projects.

Overall, the Cooper Lighting V90229-1N stands out as a premium lighting solution that combines energy efficiency, longevity, and ease of use. Whether illuminating a commercial space or enhancing a residential area, this fixture promises to deliver reliable performance and superior quality. Its blend of modern technology and thoughtful design makes it a smart investment for anyone seeking to improve their lighting experience.
Top Page Image Contents