Siemens 2011 Tango operating instructions Not affected by the lock, Number lock is switched on

18.7.99 KAP13.FM5 Gigaset 2011 Tango: A30852-X1106-B307-2-7619

The Gigaset 2011 Tango lock functions

Activating/deactivating the call number lock

			You can activate and deactivate the call number lock sep-
			arately for each registered handset. Other handsets are
			not affected by the lock.
			Calls can still be accepted on the handset even if the call
			number lock is switched on.
			The factory default setting is off.
			(tmeans: browse using x		, confirm using u		)
				Z
						OK
.t			Call up the "Service" menu item.
	Service
		#84 Start the setting procedure.
			Enter the four-digit system code (factory default "0000")
			o
			(➔ page 7). The registered handsets, i.e. their internal call
			numbers, are shown on the display:
		:

1 2 3

SET

(Example: handsets 1, 2, and 3 are registered)

SETREDIAL

o

1x SET or

@x SET

Enter the internal call number of the desired handset (1 to 6).

Switch on the call number lock for the selected handset.

Switch off the call number lock for the selected handset.

37