Siemens 2011 Tango Operation at more than one base station, Selecting the best station

18.7.99 KAP17.FM5 Gigaset 2011 Tango: A30852-X1106-B307-2-7619

Operation at more than one base station

Operation at more than one base station

You can register and operate your handset at up to 6 Gi- gaset Tango base stations.

A Gigaset Tango handset can only be registered at Gigaset Tango base stations.

This offers the following advantages:

●You can operate the same handset at base stations in different locations (e.g. in the office and at home).

●You can extend the range or the area in which you can call with the same handset in large areas.

Please note the following when operating at more than one base station:

● Ongoing calls are interrupted or cleared down when you move from one base sta- tion radio range to another.

● Internal calls can only be made within the ra- dio range of a base station, i.e. not to hand- sets that are in another base station radio range.

● If you are out of range of a base station for several minutes, and your handset is switched on, when you reenter the range it may take up to 20 minutes to "find" the base station again. In such cases, switch the mo- bile unit off for a brief time and then on again (➔ page 6).

Procedure for operating at more than one base station

We recommend following the procedure below:

1.Register your handset at the required base stations (➔ page 48) and assign the required base station numbers (1 to 6).

2.Register your handset at all base stations with the same internal call number, provided this is not yet as- signed.

Selecting the best station

Normally, radio contact is automatically reestablished if you move your handset from one base station radio area to another. You can select the best station, to which your handset can set up the best radio connection.

55