Siemens 2011 Tango operating instructions Selecting a handset for ring priority

18.7.99 KAP15.FM5 Gigaset 2011 Tango: A30852-X1106-B307-2-7619

Operating more than one handset

Excluding or reintegrating a handset from/into collective ringing

t

.

Service

#1

o

( means: browse using	x	Z	, confirm using u	OK
t

Call up the "Service" menu item.

Start the setting procedure.

Enter the four-digit base code (factory default: "0000") (➔ page 7).

)

uREDIAL :21

The current setting is shown on the display. Handsets which are in collective ringing mode are indicated by their internal call numbers and excluded handsets are indicat- ed by a space:

:

*21 123 4

SET

SETREDIAL

:

*21 12 4

SET

SETREDIAL

(Example 1: handsets1,

2,3,4 are in coll. ringing)

(Example 2: handset 3 is not in collective ringing)

ox

SET

Enter the internal call number of the desired handset (1 to 6) and confirm. If the handset is already in collective ringing mode it is excluded. If it was previously excluded it is reintegrated into the collective ringing.

Selecting a handset for ring priority

(tmeans: browse using x Z, confirm using u OK )

.t Service

#1

o

uREDIAL :22

Call up the "Service" menu item.

Start the setting procedure.

Enter the four-digit base code (factory default: "0000") (➔ page 7).

The current setting is shown on the display:

:

*22 1

(Example: handset 1 has ring priority)

ox

SET

SET

SETREDIAL

Enter the internal call number of the desired handset (1 to 6) and confirm.

50