3.INSTALLATION
3.5Connecting the boundary wire
Connect the boundary wire to the charging station:
IMPORTANT INFORMATION
The boundary wire must not be crossed when connecting to the charging station. The right hand wire end must be connected to the right hand pin on the charging station and the left hand wire end to the left pin.
1.Place the cable ends in the connector:
•Open the connector.
•Place the wire in the connector grip.
2.Press the connector together using a pair of pliers. Press until you hear a click.
3.Cut off any surplus boundary wire. Cut 1 - 2 cm above respective connectors.
4.Press the connector onto the contact pin, marked A, on the charging station.
Carefully check that the connector is properly fitted.
IMPORTANT INFORMATION
The right hand connector must be connected to the right hand metal pin on the charging station and the left hand wire end to the left connector.
26 - English
