3. INSTALLATION
-In the passage, the guide wire must therefore be placed so that the mower has as much space to run in as possible. The distance between the boundary wire and the guide wire must however be at least 30 cm.
Maximum |
distance |
At least 30 cm/12” |
At least 2m/7ft |
If the guide wire has to be installed on a steep slope, it is an advantage to lay the wire at an angle to the slope. This makes it easier for the mower to follow the guide wire on the slope.
Avoid laying the wire at sharp angles. This can make it difficult for the mower to follow the guide wire.
4.Run the guide wire up to the point on the boundary wire where a loop to facilitate the connection of the guide wire was previously added.
5.Cut the loop on the boundary wire using for instance a pair of wire cutters.
135º |
135º |
90º |
English - 29