8.MAINTENANCE
8.4Transport and removal
Secure the machine during transport. It is important that R40Li does not move when it is being transported, for instance, between lawns.
8.5 In the case of thunderstorms
To reduce the risk of damage to components in the R40Li, we recommend that all connections to the charging station are disconnected (power supply, boundary wire and guide wire) if there is a risk of a thunderstorm.
8.6 Replacing the blades
WARNING
Always use originalblades and screws when replacing.
Only replacing the blades and reusing the screw can result in the screw wearing during mowing and shearing off. The blades can then be thrown out and cause serious injury.
There are three blades on R40Li, which are screwed into the blade disc. All three blades and screws must be replaced at the same time to obtain a balanced mowing system.
Use GARDENA approved blades only.
To replace the blades:
1. Set the main switch to the 0 position.
2. Wear protective gloves.
3. Turn R40Li upside down.
4. Remove the screw. Use a straight slot or
5.Remove the blade and the screw.
6.Screw on the new blade and the new screw.
English - 53
