9. TROUBLE SHOOTING
Message | Cause | Action |
|
|
|
|
|
|
No drive | R40Li has got caught in something. | Free the mower and rectify the |
|
| reason for the lack of drive. If it is due |
|
| to wet grass, wait until the lawn has |
|
| dried before using the mower. |
|
|
|
| The working area includes a steep | Maximum guaranteed slope is 25%. |
| slope. | Steeper slopes should be isolated. |
|
| See 3.4 Installation of the boundary |
|
| wire on page 20. |
|
|
|
| The guide wire is not laid at an angle | If the guide wire is laid on a slope, it |
| on a slope. | must be laid at an angle across the |
|
| slope. See 3.6 Installation of the |
|
| guide wire on page 27. |
|
|
|
Charging station | The contact between the charging | Place R40Li in the charging station |
blocked | strips and contact strips may be poor | and check that the charging strips |
| and R40Li has made a number of | and contact strips make good |
| charging attempts. | contact. |
|
|
|
| An object is obstructing R40Li. | Remove the object. |
|
|
|
Stuck in charging | There is an object in the way of R40Li | Remove the object. |
station | preventing it from leaving the |
|
| charging station. |
|
|
|
|
Upside down | R40Li leans too much or has turned | Turn the mower the right way up. |
| over. |
|
|
|
|
Needs manual | R40Li is set in MAN operating mode. | Park the mower in the charging |
charging |
| station. This behaviour is normal; no |
|
| action required. |
|
|
|
Next start hh:mm | The timer setting prevents the mower | Change the timer settings. See 6.3 |
| from operating. | Timer (1) on page 41. |
|
|
|
| The daily standby period for the | This behaviour is normal and no |
| battery is underway. The mower has | action is required. |
| to be in the charging station for at |
|
| least 11 hours a day. |
|
|
|
|
English - 57