6. MENU FUNCTIONS
6.3 Timer (1)
The lawn should not be cut too often to obtain the best mowing result. Consequently, it is important to limit the operating time using the timer function if the working area is less than the mower's working capacity. When R40Li is allowed to mow too much, the lawn may appear flattened. Besides, the mower is subjected to unnecessary wear.
The timer function is also an ideal means to control during which periods R40Li should not mow, for example, when the children are playing in the garden.
The factory setting is 07:00 - 22:00 and it allows mowing every day of the week. This is normally a suitable setting for a 400 m2 working area.
When setting the timer, calculate that the R40Li mows about 30 m2 per hour and day.
•Work hours 1 (1-1)
to set start and stop times for operating period 1. Enter each required time in hours and minutes and press OK to confirm the entered time.
•Work hours 2 (1-2)
to set start and stop times for operating period 2. Enter each required time in hours and minutes and press OK to confirm the entered time.
•Work days (1-3)
to select the days the mower must work. R40Li will work during the days that are ticked off.
•Reset timer(1-4)
reset values to the factory settings.
To inactivate Work hour 1 or Work hour 2, enter the
time 00:00 - 00:00 to reset the timer to |
A clock icon is displayed on the start page when the timer settings are set. The clock icon is black when the mower is not allowed to mow due to a timer setting and it is white when the mower is allowed to cut.
There is an inbuilt standby period of about 11 hours a day to increase battery service life. The mower is parked in the charging station during this period. See 4.2 Using the timer on page 34.
Timer
Security
Inställningar
Work hour 1
Work hour 2
Work days
Reset timer
English - 41
