3. INSTALLATION
3.Select Home mode by pressing the house symbol key and pressing OK when the cursor is at Home. Press Start and close the cover.
4.Check that the mower follows the guide wire all the way to the charging station and that it docks with the charging station. The test is approved only if the mower is able to follow the guide wire the entire distance to the charging station and dock at the first attempt. If the mover is unable to dock on the first attempt, it will automatically try again. The installation is not approved if the mower needs two or more attempts to dock with the charging station. In this case, check that the charging station, the boundary wire and the guide wire are installed in accordance with the instructions in Chapters 3.2, 3.4 and 3.6.
5.The mower will stay in the charging station until Auto or Man mode is selected. See 5.1 Operation selection on page 37.
The guide system must first be calibrated if the above test is to provide a satisfactory result. See 3.8 First
