Siemens 200 manual Changing the display language, Resetting the handset to the factory defaults

Page 16

Gigaset 200, GBR, A31008-G200-B101-1-7619

MOBILT.FM

28.09.01

Changing the display language

The menu overview provides orientation here (see page 24).

3LANGUAGE

3ENGLISH

Open the menu.

Select and confirm.

Select and confirm the

desired language (e.g. English).

8If you inadvertently set the wrong language (i.e. one you don't understand), you can change the setting by pressing followed by .on the handset. You can then select the correct

language by paging through the menu and confirming it with the key.

You will find a list of the available languages in the menu overview on page 24.

Resetting the handset to the factory defaults

3HS RESET

3RESET YES?

or

Open the menu.

Select and confirm.

Select and confirm.

The handset has the factory defaults again.

RESET NO?

select and confirm.

8After the handset is reset, it must be replaced on the base unit with the display visible at the front, see "Step 3" (page 8).

16

Image 16

Contents Be inspired User guideDisplay symbols and special characters Brief overview of the handsetCongratulations Safety information Use only the plug-in power supply unitContents Connect up the base unit For the analog landline networkInserting the batteries Put the handset into operationUse only approved, rechargeable batter Place the handset on Base unit Charge the batteriesRecommended batteries Operating times/charging timesMaking a phone call CallingAccepting a call RedialingDisplaying the callers number Clip Activating/deactivating the key lockUsing the phone book to dial Phone bookStoring a new entry Changing an entryRegistering the handset with the base unit StepConfirm your entry Settings of the handset Volumes and tunesReceiver volume Ringing tone volumeResetting the handset to the factory defaults Changing the display languageFactory defaults of the handset Function Settings of the base unit Signaling methodFlash times „R key PrerequisitePulse/no-pulse ratio Resetting the base unit to the factory defaults Factory defaults of the base unit FunctionTroubleshooting Problem Possible Solution CauseAppendix Caring for your phoneRange GuaranteeSiemens Limited, ICM Fitzwilliam Court, Leeson Close Dublin Service UnitedKingdom IrelandMenu overview Settings of the handsetExamples Settings of the base unit Index New entry phone book 12 Number, see call number

Related manuals

Manual 282 pages 42.81 Kb