Siemens A31008-A200-J101-2-7619 manual Care, Contact with liquid, Operation with a Pabx

Page 31

Gigaset A200 / IM eng / A31008-A200-J101-2-7619 / appendix.fm / 12.06.2003

Appendix

Care

Wipe the base station and handset with a damp cloth or with an antistatic wipe. A dry cloth must never be used. This can cause static discharge.

Contact with liquid !

Should the handset come in contact with liquid, under no circumstances switch on the device. Remove all batteries immediately.

Allow the liquid to drip out of the device and afterwards dab all parts dry.

Place the handset without the batteries in a warm, dry place for at least 72 hours. In many cases it will subsequently be possible to put the phone into service again.

Operation with a PABX

The following settings are only necessary if your PABX requires them, please refer to the operating instructions for your PABX.

Changing the dialling procedure

You have the following options for the dialling procedure:

◆Tone dialling (DTMF),

◆Pulse dialling (IWV).

MENU ¢ BASE SET ¢ ADD FEATURES ¢ DIAL MODE

 

 

[__________] OK[ ]￿￿

Select dialling procedure and confirm.

Long press (return to idle status).

i

Temporary switch to tone dialling (DTMF)

If your PABX works with pulse dialling but you need tone dialling for a call (e.g. to listen to an external mail box/answering machine), you must switch to pulse dialling during the call.

Requirement: You have already started the call.

MENU ¢ TEMP TONE

Setting the flash time

MENU ¢ BASE SET ¢ ADD FEATURES ¢ TBR

 

 

[__________] OK[ ]￿￿

Select flash time (80 ms, 100 ms, 120 ms, 180 ms,

 

250 ms, 300 ms or 600 ms) and confirm.

Long press (return to idle status).

29

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Gigaset Brief overview Brief overviewContents Base station settings Safety precautions Safety precautionsPositioning the base station Making the phone ready for serviceMaking the phone ready for service Advice on a suitable placeConnecting the base station Remain plugged Making the handset ready for serviceRemove protective film Insert batteriesMaking the phone ready for service Activating/deactivating keypad protection Switching the handset on and offOperating the phone and menu management Signal tonesOperating the phone and menu management Display keysReturn from any position in the menu to idle status There are two ways to access a functionDisplay in idle status Menu managementSet date and time Time functionsDisplaying the callers phone number CLIP/CLI Making callsMaking external calls and ending a call Accepting a callEnding call hold Putting on holdSave phone number in directory network access list Using the directory and other listsDirectory and network access list Using the directory and other listsSelect phone number from the directory Dialling with the network access list call-by-callSpeed dialling call-by-call from the network access list Either Key in phone numberOrder to use speed dialling Either View entry from directory/network access list and changeDelete single entry from directory/network access list Delete directory/network access listCopy number from the redial list to the directory Redial listRedialling Delete redial listOpen caller list and select entry Caller listCalling back a caller from the list Example Establish date and time of a callAutomatic registration Gigaset a 2 handset Registering and de-registering handsetsManual registration Gigaset a 2 handset De-registering handsets Specific registration other handsetsForwarding a call to another handset Operating more than one handsetMaking internal calls and ending calls Operating more than one handsetEither End internal call, accept external call Internal enquiry callAccepting/rejecting a waiting call during an internal call End enquiry callBarging Barging in on an external callPaging Activating/deactivating the functionLoudspeaker volume Handset settingsActivate/deactivate ringer Activate/deactivate battery warning toneReturn handset to factory settings Handset settings Ringer volumeChanging the system-PIN Base station settingsReturn base station to factory default settings Base station settingsAppendix Questions and AnswersWhat happens if … Possible cause Possible solution AppendixContact with liquid Changing the dialling procedureSetting the flash time CareAppendix Changing pause after line seizure Other SettingsFactory settings of handset Default settings Status after Description Reset2 x 3 x 4 x 5 x 6 Appendix Factory settings of base stationDisplay language Character map and text entryRecommended batteries Technical dataPower consumption General technical dataService Customer Care Excerpt from the original declaration Main menu Menu overviewMenu overview Directory key and network operator list key Index IndexHandset Index Gigaset A200 / IM eng / A31008-A200-J101-2-7619 / coverIV.fm

A31008-A200-J101-2-7619 specifications

The Siemens A31008-A200-J101-2-7619 is a highly regarded model within the Siemens portfolio, known for its robust engineering and advanced functionality. This device is designed to cater to a variety of industrial applications, offering dependable performance that aligns with Siemens’ commitment to quality and innovation.

At the core of the A31008-A200-J101-2-7619 is its state-of-the-art technology, which includes cutting-edge microprocessor control. This feature facilitates precision operations and enables complex calculations to ensure optimal performance. The integration of intelligent software solutions further enhances its capabilities, allowing for seamless communication with other industrial systems. This level of connectivity is vital in automated environments, promoting efficiency and streamlined operations.

One of the main characteristics of the Siemens A31008-A200-J101-2-7619 is its versatility. It is designed to support multiple industrial protocols, ensuring compatibility with a wide range of devices and systems. This adaptability makes it an ideal choice for organizations looking to integrate modern solutions into their existing setups without significant overhauls.

In terms of physical attributes, the A31008-A200-J101-2-7619 boasts a compact design that allows for easy installation in limited spaces. Its robust construction guarantees durability in harsh industrial settings, contributing to reduced maintenance costs and increased operational lifespan. Furthermore, the device is built to withstand extreme temperatures and environmental conditions, making it suitable for outdoor applications as well.

Another noteworthy feature is its energy efficiency, which aligns with modern sustainability goals. The Siemens A31008-A200-J101-2-7619 is engineered to minimize energy consumption while maximizing performance, supporting organizations in their quest for cost-effective and eco-friendly solutions.

User-friendliness is also a significant aspect of this model. The intuitive interface and comprehensive diagnostics tools enable quick system configuration and troubleshooting, which is essential for minimizing downtime.

In conclusion, the Siemens A31008-A200-J101-2-7619 stands out for its advanced technologies, versatility, and robust characteristics, making it an ideal choice for diverse industrial applications. Its balance of performance, energy efficiency, and user accessibility positions it as a reliable component in modern automation systems.
Top Page Image Contents