Siemens A31008-A200-J101-2-7619 manual Making the phone ready for service

Page 9

Gigaset A200 / IM eng / A31008-A200-J101-2-7619 / starting.fm / 12.06.2003

Making the phone ready for service

Step 3: Registering the handset with the base station and charging the batteries

Place your handset in the base station with the display visible at the front – the con- firmation tone will ring (rising sequence of tones). The handset will then register itself automatically with the base station (page 20), all symbols flashing in the display. The process takes about a minute. Once completed, "1" will appear in the top, left-hand cor- ner of the display. This handset has been allocated the first internal number.

Only for A200 Duo: To register a second handset, proceed as described above. After successful registration, "2" will then appear in the top, left-hand corner of the display.

i

◆To register further handsets, see page 20 onwards.

Now leave the handset in the base station to allow the batteries to charge, since these are not charged prior to delivery. The battery charging process is indicated on the hand- set by a flashing battery symbol =.

= Flat batteries	V Batteries 2/3 charged
e Batteries 1/3 charged	U Batteries full

Once the batteries have been charged, your phone is ready for service. You need to set the date and time to ensure that the time of incoming calls can be noted correctly (page 11).

i

◆For the first charging we recommend a continuous charging time as shown in the table (page 32) – regardless of the charging status shown in the display! Battery capacity reduces for technical reasons after a period of time.

◆The batteries warm up during charging - this is normal and not a cause for concern.

◆The correct charging status for the batteries will only be shown after an unbroken charging/discharging cycle. You should therefore not open the battery compartment unnecessarily.

◆Once the first charging cycle is completed you can put your handset back in the base station after each call. Charging is controlled elec- tronically. This ensures optimum battery charging without overload- ing.

7

Image 9

Contents Gigaset Brief overview Brief overviewContents Base station settings Safety precautions Safety precautions Making the phone ready for service Making the phone ready for service Advice on a suitable place Positioning the base stationConnecting the base station Remove protective film Making the handset ready for serviceInsert batteries Remain pluggedMaking the phone ready for service Activating/deactivating keypad protection Switching the handset on and offOperating the phone and menu management Signal tonesDisplay keys Operating the phone and menu managementDisplay in idle status There are two ways to access a functionMenu management Return from any position in the menu to idle statusSet date and time Time functionsMaking external calls and ending a call Making callsAccepting a call Displaying the callers phone number CLIP/CLIEnding call hold Putting on holdDirectory and network access list Using the directory and other listsUsing the directory and other lists Save phone number in directory network access listSpeed dialling call-by-call from the network access list Dialling with the network access list call-by-callEither Key in phone number Select phone number from the directoryDelete single entry from directory/network access list View entry from directory/network access list and changeDelete directory/network access list Order to use speed dialling EitherRedialling Redial listDelete redial list Copy number from the redial list to the directoryCaller list Open caller list and select entryCalling back a caller from the list Example Establish date and time of a callRegistering and de-registering handsets Automatic registration Gigaset a 2 handsetManual registration Gigaset a 2 handset De-registering handsets Specific registration other handsetsMaking internal calls and ending calls Operating more than one handsetOperating more than one handset Forwarding a call to another handsetAccepting/rejecting a waiting call during an internal call Internal enquiry callEnd enquiry call Either End internal call, accept external callPaging Barging in on an external callActivating/deactivating the function BargingLoudspeaker volume Handset settingsReturn handset to factory settings Activate/deactivate battery warning toneHandset settings Ringer volume Activate/deactivate ringerReturn base station to factory default settings Base station settingsBase station settings Changing the system-PINWhat happens if … Possible cause Possible solution Questions and AnswersAppendix AppendixSetting the flash time Changing the dialling procedureCare Contact with liquidFactory settings of handset Other SettingsDefault settings Status after Description Reset Appendix Changing pause after line seizureDisplay language Appendix Factory settings of base stationCharacter map and text entry 2 x 3 x 4 x 5 x 6Power consumption Technical dataGeneral technical data Recommended batteriesService Customer Care Excerpt from the original declaration Menu overview Main menuMenu overview Directory key and network operator list key Index IndexHandset Index Gigaset A200 / IM eng / A31008-A200-J101-2-7619 / coverIV.fm