WatchGuard Technologies Firebox X5W manual Remove insulator shields from bottom chassis

Page 6

Design for Manufacturing and Environment Document

3.5–Remove battery; remove screws and separate main PCBA from chassis bottom

Material removed (P/N & material type)

Battery –coin cell0301-001– Manganese oxide / Lithium CR2032

Remove screws0863-002 - Phillips head,

stainless steel, 4 ea.

Instruction visual

Remove battery from clip

Remove PCBA screws -4 ea.

Separate PCBA from chassis bottom

3.6 –Remove insulator shields from bottom chassis

WatchGuard Technologies.Doc #480-2521-001 Rev. A Page 6 of 8 Authorization and Revision History for this document is available in the WatchGuard ECO system

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Edge Wireless De-manufacturing Instructions Design for Manufacturing and Environment DocumentDesign for Manufacturing and Environment Document Purpose ScopeInstruction visual Rubber Feet Stand-offs Remove insulator shields from bottom chassis Disconnect RF cables from RF Pcba Applicable Documents Revision History Revised Section Reason ECO#
Top Page Image Contents