WatchGuard Technologies Firebox X5W Design for Manufacturing and Environment Document Purpose

Page 2

Design for Manufacturing and Environment Document

1.0Purpose

This instruction defines the de-manufacturing process for the recovery of this product family as it pertains to recycling of the major product components.

2.0Scope

This instruction applies to the following product family and family part numbers.

Product Family Name

Family part #’s (not necessarily inclusive)

Firebox X Edge Wireless

• Firebox X5W; all revisions

 

•

Firebox X15W; all revisions

 

•

Firebox X50W; all revisions

WatchGuard Technologies.Doc #480-2521-001 Rev. A Page 2 of 8 Authorization and Revision History for this document is available in the WatchGuard ECO system

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Edge Wireless De-manufacturing Instructions Design for Manufacturing and Environment DocumentDesign for Manufacturing and Environment Document Purpose ScopeInstruction visual Rubber Feet Stand-offs Remove insulator shields from bottom chassis Disconnect RF cables from RF Pcba Applicable Documents Revision History Revised Section Reason ECO#
Top Page Image Contents