WatchGuard Technologies Firebox X5W manual Disconnect RF cables from RF Pcba

Design for Manufacturing and Environment Document

Material removed (P/N & material type)

Painted metal enclosure; chassis bottom

1769-001 - 22Ga. EG w/powder coat (Interpon 700 -epoxy/polyester)

Insulator shields1780-001 - Insulator,

31.3mm round, Mylar, 2 ea. 1767-001 - Insulator,

42x221mm, Mylar, 1 ea.

Instruction visual

Remove EMI shields

3.7 –Bend RF PCBA clip (up) and remove RF PCBA from main PCBA

Material removed (P/N & material type)

Main PCBA

1724-001 - Printed circuit assembly

Instruction visual

Remove RF PCBA by pulling out

Release connector, 2 sides

Bend clip up

3.8 –Disconnect RF cables from RF PCBA

WatchGuard Technologies.Doc #480-2521-001 Rev. A Page 7 of 8 Authorization and Revision History for this document is available in the WatchGuard ECO system