Appendix A: Troubleshooting
This appendix provides solutions to problems that may occur during the installation and operation of the Cordless IP Phone. Read the description below to solve your problems. If you can't find an answer here, check the Linksys website at www.linksys.com.
Common Problems and Solutions
1.No dial tone when pressing the Talk & Recall button.
This means the base unit is not properly connected to the PC, the Handset is too far from the base unit, or the battery is low (low battery icon is displayed).
-Check the connections.
-Move closer to the base unit.
-Charge battery.
2.The Base/Handset icon is flashing.
This means the handset is not registered or the handset is out of range.
-If the handset is unregistered, it displays UNREGISTERED. You should register the handset.
-Move the Handset closer to the base unit.
3.When the handset is placed on the charger, no beep is heard.
This means that either the handset is not placed properly on the charger, the charging contacts are dirty, or the handset tone has been turned off.
-Take the handset off the charger and put it back again.
-Clean charging contacts with a clean and dry cloth.
-Turn on the handset tone from the Sounds Menu.
Appendix A: Troubleshooting
Cordless Internet Telephony Kit
69
Common Problems and Solutions