Curtis TC924 owner manual Programming One-Touch Voice Mail Dialing, Changing the Pause Time

Page 26

Caller ID System Operation

5.When the desired setting is displayed, press and hold the Re/Pa/Save button to

save the setting. A long “beep” will sound to confirm the setting has been saved.

6. Continue with programming or press the Voice Mail/Func button to return to STANDBY mode.

NOTE: The standard and default flash time setting is 600 msec. This is the setting you should use to access standard telephone services such as call waiting. This setting is adjustable to allow for PBX and other special uses.

H. Changing the Pause Time

1. Press and hold the Voice Mail/Func button to enter the menu.

2.Press the 8 button to go to the PAUSE TIME programming option.

3. Press the Flash/Edit button to change the setting. “4” will begin flashing.

4.Press the SCROLL UP or DOWN button to select the desired time delay.

5.

When the desired setting is displayed, press and hold the Re/Pa/Save button to

 

save the setting. A long “beep” will sound to confirm the setting has been saved.

6.

Continue with programming or press the Voice Mail/Func button to return to

 

STANDBY mode.

I. Programming One-Touch Voice Mail Dialing

1. Press and hold the Voice Mail/Func button to enter the menu.

2.Press the 9 button to go to the VOICE MAIL programming option.

3. Press the Flash/Edit button to enter the voice mail speed dial number.

4.Press the TELEPHONE KEYPAD 1 to 0 buttons to enter the phone number used to

 

access your voice mail messages (up to 15 digits).

5.

When the desired setting is displayed, press and hold the Re/Pa/Save button to

 

save the setting. A long “beep” will sound to confirm the setting has been saved.

6.

Continue with programming or press the Voice Mail/Func button to return to

 

STANDBY mode.

25

Image 26
Contents Model TC924 Contents Changing the Battery Pack Problem Solving Safety Instructions Important Safety InstructionsBattery Safety Handset Controls Microphone Base Unit Controls Base Unit AntennaConnecting Your Phone Getting StartedBelt Clip Installation Battery CompartmentReceiving Calls Cordless Telephone OperationPreparing for Use Redial Feature Placing CallsUsing the Headset Feature Caller ID System Operation Caller ID SystemOne-Touch Voice Mail Dialing Caller ID with Call WaitingMSG Waiting Message Waiting Placing a Call from the Caller List Caller ListViewing the Caller List Deleting a Single Record Storing Caller ID Records into the Directory Phone BookDeleting Caller ID Records Deleting All RecordsName and Telephone Number Directory Phone Book Viewing the Directory Phone BookTelephone Keypad Characters ExamplePlacing Calls from the Directory Phone Book Editing a Stored Number in the Directory Phone BookDeleting a Stored Number in the Directory Phone Book Preferred CallsFunction Settings KeypadSetting the Ringer Level Changing the LanguageSetting the Time and Date Turning the First Ring on or OFFChanging the Flash Time Adjusting the ContrastSetting the PBX Number Programming One-Touch Voice Mail Dialing Changing the Pause TimeSetting the Area Code Deleting Message Waiting IndicationSecurity System Resetting Security Code and Channel InformationMulti-Channel Access Security SystemChanging the Battery Pack Recharging the Battery PackRecharging the Battery Pack To Replace the Battery PackProblem Solving Problem Solving Noise Technical InformationTechnical Information RangeFCC Requirements FCC NoticeRinger Equivalence Number FCC Requirements