Caller ID System Operation
J. Deleting Message Waiting Indication
1. Press and hold the Voice Mail/Func button to enter the menu.
2.Press the 0 button to go to the MESSAGE WAITING programming option.
3. | Press the Flash/Edit button to reset the Message Waiting Indication. |
| “DEL” will begin flashing. |
4. | Press and hold the Re/Pa/Save button to delete the indication. A long |
| “beep” will sound to confirm the setting has been saved. |
5. | Continue with programming or press the Voice Mail/Func button to return |
| to STANDBY mode. |
K. Setting the Area Code
1.Press and hold the Voice Mail/Func button to enter the menu.
2. Press the * button to go to the AREA CODE programming option.
3. Press the Flash/Edit button to change the setting. “000” will begin flashing.
4.Press the TELEPHONE KEYPAD 1 to 0 buttons to enter the three digit area
code for your phone number.
5. When the desired setting is displayed, press and hold the Re/Pa/Save button to save the setting. A long “beep” will sound to confirm the setting has been saved.
6.Press the Voice Mail/Func button to return to STANDBY mode.
NOTE:
Do not use the AREA CODE programming if you are required to dial 10 digits
26