VCR display, To Set the Colour mode | Panasonic NV-DV2000EC specs

VCR display

Operations

1Press SET UP, and then press 34 (CURSOR) to select VCR functions and press OK.

3Press 34(CURSOR) to select ON, OFF or DIMMED, and then press OK.

ON:	When VCR is turned off, the characters
	are lit in the VCR display.
OFF:	When VCR is turned off, the characters
	are not lit in the VCR display.
DIMMED:	When VCR is turned off, the characters
	are dimmed in the VCR display.

4Press EXIT to exit the On Screen Display.

Operations

1Press SET UP, and then press 34 (CURSOR) to select VCR functions and press OK.

3Press 34 (CURSOR) to select COLOUR or B/W, and then press OK.

COLOUR: When performing playback in colour.

B/W: When performing playback in black and white.

4 Press EXIT to exit the On Screen Display.

Operations

1Press SET UP, and then press 34 (CURSOR) to select VCR functions and press OK.

3Press 34(CURSOR) to select ON or OFF, and then press OK.

ON:	Set to increase detail. Normally set to this
	position.
OFF:	Set to reduce picture noise.

4Press EXIT to exit the On Screen Display.

(For Recording only)

Operations

1Press SET UP, and then press 34 (CURSOR) to select VCR functions and press OK.


2	Press 341	VCR functions			Settings
	(CURSOR) to select	OSD	: AUTO		Settings
	TBC.	VCR display	: DIMMED
	TBC.	Colour mode	: COLOUR
		Comb filter	: ON
		TBC	:	ON
		REC DNR	:	LEVEL1
		PB DNR	: LEVEL1
		Remote	: VCR1
3	Press 34 (CURSOR) to select ON or OFF, and				Various
3	Press 34 (CURSOR) to select ON or OFF, and

then press OK.

ON:	When recording analogue VCR the shaking
	and distortion of the pictures are reduced
	during playback.
OFF:	When the horizontal lines appear during
	playback of the edited picture even if TBC
	is set to ON, set to OFF.

4Press EXIT to exit the On Screen Display.

≥Alternatively, you can press the TBC button of the VCR and set for the TBC function. [R17]