17 18 19 20 21 2217 23
DIGITAL VCR
24 | 25 26 27 28 | 29 | 30 | 31 |
Before Use
17Infra-red Transmitter window
18OK button
To start Manual editing and to store the selection on the SET UP or EDIT MENU screen.
19VIDEO INSERT button [R39,41]
For the Video Insert function and the AV Insert function.
20AUDIO INSERT button [R39,41]
For the Audio Insert function and the AV Insert function.
21AUDIO DUB button [R39,41,42]
For the Audio Dubbing function or the Audio Mixing function.
22JOG/SHUTTLE button and lamp
To switch to the Jog/Shuttle mode. When the button is pressed, it lights and the VCR enters the Jog/ Shuttle mode.
In the stop mode: Still picture (Jog/Shuttle mode).
During playback: Still picture (Jog/Shuttle mode).
23INPUT SELECT button
To select the A1, A2, A3, A4 or DV IN (DV1 or DV2) external recording source.
24COUNTER RESET button [R18]
To reset the tape counter (elapsed time) to “0:00.00”.
≥The tape counter is automatically reset to
“0:00.00”. when a video cassette is inserted.
≥It is not possible to reset the Time code to “0h00m00s00f ” using COUNTER RESET.
25COUNTER ZERO STOP button [R18]
To use the zero stop function at the tape counter display.
26PLAYER button
To operate this VCR as the playback unit for editing.
27SEARCH SELECT button [R18]
To search for a recorded programme using the index/photoshot index search.
28RECORDER button
To operate this VCR as the recording unit for editing.
29INDEX/PHOTO buttons [R18]
For the index/photoshot index search function.
30STEREO SELECT button [R17,41,42,45,51]
To select the audio track (STEREO1 audio and/or STEREO2 audio) on a tape which was recorded in the 12bit audio mode. During playback, each time the button is pressed, the sound changes as follows:
STEREO1 STEREO2 STEREO1 STEREO2
(MIX)
≥The audio track cannot be selected during the playback of a tape recorded in the 16bit audio mode.
≥When INPUT SELECT is set to DV1 or DV2, the audio track can be selected by STEREO SELECT at any time: it does not have to be during playback.
31VCR1/2/3 switch
Set the switch on the side panel of the editing controller to the appropriate position when more than two or three Panasonic VCRs is being used.
VCR1: | Select this position on both the |
| VCR and editing controller for |
| normal use with one VCR. |
VCR2: | Select this position when using two |
| Panasonic VCRs. |
VCR3: | Select this position when using |
| three Panasonic VCRs. |
!" Child Lock buttons [R12]
To set the child lock function when you keep pressing OK and MARK IN for more than five seconds.
11
