One-Touch Audio Mixing
This function is used to mix the audio on STEREO1, which has already been recorded, with audio from a external recording source (A2, A3 or A4), and record the result on STEREO2.
This function is useful for adding new audio, such as music or a narration, to the original audio which has already been recorded.
3 1,5
DIGITAL VCR
| STEREO | AUDIO | REW | STOP |
| PLAY | FF PAUSE |
< EJECT | SERECT | OUT |
| ||||
EDIT | 8mm CONTROL | AUDIO REC LEVEL | STEREO1 | STILL |
| ||
AUDIO MIX | ALBUM | ¥REC/OTR | |||||
¥ DV IN/OUT DV SELECT |
|
|
|
|
| ||
1 |
|
|
|
|
|
|
|
2 |
|
|
|
|
| INPUT SELECT | |
|
|
|
|
|
|
| |
AV4
|
|
|
| 0 | 10 | 0 STEREO1 | STEREO2 10 |
RECORDER | EDIT CONTROL | 8mm |
|
|
|
| AV4 |
PLAYER | PASSIVE DV EDIT | CONTROL MIXING EDIT | SP/LP TBC 3D DNR |
|
| OUT | |
PRINTER/ |
|
|
| VIDEO | L– AUDIO – R | ||
D.STILL PICTURE |
|
|
|
|
|
|
|
7 | 2,5 | 4 | 6 |
Preparations
≥Confirm that the TV is on and the VCR viewing channel is selected.
≥Complete necessary connections and settings.
≥Set
Operations
1Press JOG/SHUTTLE on the Editing controller, and check that the button is lit.
2Search for the edit start point on the recording VCR.
3Press AUDIO DUB on the Editing
controller. | A DUB ST 2 | |
ST12 | ||
≥ The picture from the playback unit | ||
| ||
appears on the screen. |
|
4Press MIXING EDIT.
5Search for the edit start point on the playback unit.
6Press JOG/SHUTTLE on the Editing controller.
≥Editing begins.
≥If you wish to adjust the volume of the original audio (STEREO1) and external recording source (A2, A3 or A4) during Audio Mixing,
AUDIO MIX: To adjust the volume of the original audio (STEREO1).
AUDIO REC LEVEL: To adjust the volume of the audio from external recording source (A2, A3 or A4).
dB
ST1 2 R l l l l l l l l l
≥To continue editing, press JOG/SHUTTLE on the Editing controller, and repeat steps
7Press ∫ (STOP) on the Editing controller to stop editing.
To Monitor the Mixed Audio after Audio Mixing
Press STEREO SELECT during playback and select STEREO2.
| dB | |
ST 2 | L l l l l l l l l |
|
ST1 2 | R l l l l l l l l | l |
Notes:
¡Audio Mixing is not possible in the following cases:
When the tape in the recording VCR (the
Recorded in 16bit audio mode; Recorded in LP mode;
Blank, or contains a blank portion in the middle. When INPUT SELECT is set to DV1 or DV2.
¡In order to ensure that the editing operation is performed properly, the editing points should be set at least 20 seconds after the beginning of the tape.
¡When using the Editing controller for remote control: In order to conserve battery power, JOG/SHUTTLE turns off after 30 seconds.
If JOG/SHUTTLE turns off after the edit start point has been set on the recording unit (step 2), it is necessary to press JOG/SHUTTLE again (so that it is lit) before searching for the edit start point on the playback unit.
If JOG/SHUTTLE turns off after the edit start point has been determined on the playback unit (step 5), it is necessary to press JOG/SHUTTLE again in order to start editing.
42
