Panasonic NV-DV2000EC Other Playback and Recording Functions, 3D DNR Functions

Other Playback and Recording Functions

Í / I	< EJECT	STEREO	AUDIO	REW	STOP			PLAY	FF PAUSE
		SERECT	OUT
		EDIT	8mm	AUDIO REC LEVEL		STEREO1		STILL
¥ DV2	DV SELECT					AUDIO MIX		ALBUM	¥REC/OTR
	1
	2							INPUT SELECT
				0	10 0	ST1	ST2	10

AV4	RECORDER	EDIT CONTROL							AV4
IN	PLAYER	PASSIVE DV	EDIT 8mm	MIXING EDIT	SP/LP	TBC	3D DNR	PRINT	OUT

S-VIDEO VIDEO	PRINTER/	S-VIDEO VIDEO	L - AUDIO - R
	L/MONO-AUDIO-R D.STILL PICTURE

SP/LP TBC 3D DNR

3D DNR Functions

3D DNR is the 3-Dimensional Digital Noise Reduction Function. [R58]

To Ensure High Playback Picture Quality (PB 3D DNR Function)

To set the 3D DNR mode for playback, proceed as follows.

≥Press the 3D DNR button before or during playback to activate the PB 3D DNR function, so that the “PB DNR” indication appears on the VCR display.

≥We recommend that you leave this function activated for normal use of the VCR.

≥When you play back a tape that was recorded with REC DNR function on, set “PB DNR” to off.

≥See [R24] to set the level of “PB 3D DNR” function.

≥In the initial settings, “PB DNR” is “on.”

≥If afterimage occurs, turn “PB DNR” off.

To Record in the High Picture Quality (REC 3D DNR Function)

To set the 3D DNR mode for recording, proceed as follows.

≥Press the 3D DNR button before recording. The

“REC DNR” indication appears on the VCR display.

≥When you cannot ensure high playback picture quality, press the 3D DNR button to cancel the “REC 3D DNR” function, so that the “REC DNR” indication is turned off.

≥Press the INPUT SELECT button to select A1–A4.

Each time the 3D DNR button is pressed, the indication changes on the VCR display as follows.

REC DNR PB DNR OFF

To Ensure a Stable and Shake-Free Recording Picture (TBC)

(For Recording Only) [R57]

TBC stands for Time Base Corrector.

When the tape movement is unstable during recording, the playback picture may shake from side to side and the picture may become distorted.

Activating the Time Base Corrector in a case like this stabilize the picture and reduces the shaking.

≥ Press the TBC button before recording to activate
“TBC” function so that the “TBC” indication appears
on the VCR display.
≥ We recommend that you leave this function activated
for normal use of the VCR.
≥ When you cannot ensure high playback picture
quality, press the TBC button to cancel “TBC” function
so that the “TBC” indication is turned off.
≥ Only when A1–A4 is selected by pressing the INPUT
SELECT button, “TBC” function will be elected.
This function has an effect only for tapes on which
analogue signals from A1-A4 have been recorded.
However, on the TV screen, you cannot confirm the
effect of this function during recording.					Recording
recording level or if sound distortion appears when you
≥ In the initial settings, “TBC” is “ON.”
To Manually Adjust the Audio Recording Level
Under normal circumstances, this VCR adjusts the
recording level to prevent sound distortion due to peaks.
However, if you want to manually adjust the audio
confirm the audio output, perform the operation steps					and
below before you start the actual recording.
Adjust the recording sound with the AUDIO REC LEVEL
knob.		dB -¶30 20 10 5 0 OVER			Playback
≥ Press the knob once so that it pops out. (To close the
front door, press the knob into the VCR.)
≥ Turn the knob so that the audio level indication on the
VCR display is not “OVER”.
	ST1 2			l l l l l l l l
		L
	ST1 2		l l l l l l l l l l l l l
		R

≥This function has an effect only for tapes on which analogue signals from A1-A4 have been recorded. You cannot adjust the audio level from DV input.

(However, you can adjust the audio level by connecting to the external input socket.)

To Change the Audio Mix Sound Balance

Select “Mix sound” during playback in the 12 bit audio mode, then turn the AUDIO MIX knob to adjust the balance.

≥Press the knob once so that it pops out. (To close the front door, press the knob into the VCR.)

≥Turn the knob to the left to increase the “ST1” sound, or to the right to increase the “ST2” sound.

The audio track cannot be selected during the playback of a tape recorded in the 16 bit audio mode.

≥Use the STEREO SELECT button to select the audio, and then adjust the balance.

dB -¶30 20 10 5 0 OVER ST1 2 L l l l l l l l l

ST1 2 R l l l l l l l l l

17