Panasonic NV-DV2000EC Helpful Hints, Editing Controller does not work correctly

“Cannot set programme”

‘Have the maximum number of programmes already been set?

“A set programme is skipped”

‘Are there at least 4 seconds between the edit start point and the end point?

Editing may not be performed properly for a programme with a set duration of less than 4 seconds.

“Cannot adjust the edit timing”

‘The timing cannot be adjusted if the playback unit that is connected does not have a Time code or tape (linear) counter display.

Editing Controller does not work correctly

The symptom description is indicated in quotation “ ”.

“Editing controller does not operate correctly.”

‘Remote controller transmitter beam is not reaching the VCR. Ensure that Editing controller is being pointed at the VCR and that the transmitter beam is not obstructed.

‘Distance is too far. Use Editing controller within

7 m of the VCR. If operation is not possible in this range, replace the batteries.

‘Batteries are spent. Replace the batteries. Note the precautions for replacement on [R12].

‘Batteries are incorrectly fitted with (+/-) reversed. Fit the batteries correctly as shown on page 12.

‘Wrong remote control mode has been selected. Set to the correct remote control mode [R24].

Helpful Hints

61