Editing Functions

Using this VCR, 4 types of One-Touch-Edit, 3 types of Manual Editing and 3 types of Programme Editing can be selected.

In Programme Editing, after setting the edit start/end point, editing can be performed automatically. Edit programmes can be set up to 10 scenes for each editing function (20 scenes for Assemble editing).

Programme editing with Time Code enables high edit accuracy, typically within 5 frames at the edit start point (1 frame=1/25th of a second).

The accuracy of the edit start/end point on the playback VCR will vary depending on the VCR/Movie Camera being used. Use the Edit Timing Adjustment function to give the best possible accuracy.

One-Touch-Edit

Assemble Editing [R40]

Insert Editing (Video, Audio, AV) [R41]

Audio Dubbing [R41]

Audio Mixing [R42]

Manual Editing

Copying [R43]

Insert Editing (Video, Audio, AV) [R44]

Audio Dubbing [R45]

Programme Editing

Assemble Editing [R46]

Insert Editing (Video, Audio, AV) [R48]

Audio Dubbing [R50]

Copying

Allows the re-recording (copying) of the picture and sound from one tape onto another tape.

Video Insert

Allows the partial replacement of the picture on a recorded tape. Sound is left in its original state.

Performing the Copying operation on a tape that was recorded in 12bit audio mode.

Audio Insert

Allows the partial replacement of sound on a recorded tape. Picture is left in its original state.

AV Insert

Allows the partial replacement of the picture and sound on a recorded tape.

Preparations for Editing

Performing the AV Insert editing operation on a tape that was recorded in 12bit audio mode.

25

Page 25
Image 25
Panasonic NV-DV2000EC operating instructions Editing Functions, Preparations for Editing