Panasonic NV-DV2000EC operating instructions One-Touch Assemble

One-Touch Assemble

If the One-Touch Edit function is used, Assemble editing can be performed by controlling the playback unit through the NV-DV2000.

1,5

DIGITAL VCR

3 6 2,4

Preparations

≥Confirm that the TV is on and the VCR viewing channel is selected.

≥Complete necessary connections and settings. [R28–35]

≥Set One-Touch-Edit to ON on Edit functions menu. [R37]

Operations

1Press JOG/SHUTTLE on the Editing controller, and check that the button is lit.

2Search for the edit start point on the recording VCR.

QP

3Press ¥ (REC).

≥The picture from the playback unit appears on the screen.

4Search for the edit start point on the playback unit.

5Press JOG/SHUTTLE on Editing controller.

≥Editing begins.

≥To continue editing, press JOG/SHUTTLE on the Editing controller, and repeat steps 4–5.

6Press ∫ (STOP) on the Editing controller to stop editing.

Notes:

¡Although Assemble editing can be performed in LP mode, Insert, Audio Dubbing, and Audio Mixing cannot be performed with a tape recorded in LP mode. It is necessary to first copy the tape in SP mode.

¡In order to ensure that the editing operation is performed properly, the editing points should be set at least 20 seconds after the beginning of the tape.

¡When using the Editing controller for remote control: In order to conserve battery power, JOG/SHUTTLE turns off after 30 seconds.

If JOG/SHUTTLE turns off after the edit start point has been set on the recording unit (step 2), it is necessary to press JOG/SHUTTLE again (so that it is lit) before searching for the edit start point on the playback unit.

If JOG/SHUTTLE turns off after the edit start point has been determined on the playback unit (step 4), it is necessary to press JOG/SHUTTLE again in order to start editing.

40