Marantz Comprehensive Guide to Setting Up Your Home Theater System with SR6005

Power on

Power on

NOTE

Before you use the remote control unit for the first time, be sure to insert the batteries (vpage 81 “Inserting the batteries”).

The power indicator switches off, and power is supplied to the unit.

Press ON to turn on power to the unit.

2 Change the TV input to the input of this unit.

3

the TV and subwoofer

Power on

1 Turnpower.on

Turn on power

3

SVENSKA NEDERLANDS

1 2 3 4 5

ESPAÑOL ITALIANO FRANÇAIS DEUTSCH ENGLISH

4 Set up speakers
(Audyssey® Auto Setup)	1	2	3	4	5

The acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made automatically. This is called “Audyssey Auto Setup”.

To perform measurement, place the setup microphone in multiple locations all around the listening area. For best results, we recommend you measure in six positions, as shown in the illustration (up to six positions).

•• When performing Audyssey Auto Setup, MultEQ®/Dynamic EQ®/Dynamic Volume® functions become active (vpage 57, 58).

•• To set up the speakers manually, use “Speaker Setup” (vpage 61) on the menu.

NOTE

•Make the room as quiet as possible. Background noise can disrupt the room measurements. Close windows, silence cell phones, televisions, radios, air conditioners, fluorescent lights, home appliances, light dimmers, or other devices as measurements may be affected by these sounds.

•Cell phones should be placed away from all audio electronics during the measurement process as Radio Frequency Interference (RFI) may cause measurement disruptions (even if the cell phone is not in use).

•Do not unplug the setup microphone from the main unit until Audyssey Auto Setup is completed.

•Do not stand between the speakers and setup microphone or allow obstacles in the path while the

measurements are being made. This will cause inaccurate readings.

• Loud test sounds may be played during Audyssey Auto setup. This is part of normal operation. If there is background noise in room, these test signals will increase in volume.

• Operating VOLUME +, – during the measurements will cancel the measurements.

• Measurement cannot be performed when headphones are connected.

Simple version

Basic version

Advanced version

Information

7