Marantz SR6005 manual Display, Q3Q2Q1

ENGLISH

Display

Q5		Q4	Q3Q2Q1	Q0	o	i	u y
q	w		e				r t

qInput signal indicators
wInput signal channel indicators
These light when digital signals are input.
When playing HD Audio sources, the	indicator lights when a

signal from an extension channel (a channel other than the front,

center, surround, surround back or LFE channel) is input.
If there are two or more extension channels, the	and
indicators light.

eInformation display

The input source name, surround mode, setting values and other information are displayed here.

rFront height channel indicators

When audio is output from the front height channels, the “H” indicator lights.

tFront speaker indicator

This lights according to the setting of the front A and B speakers. yMaster volume indicator

uMUTE indicator

This lights when the mute mode is select (vpage 24).

iAUDYSSEY indicators

Lighting is as follows, depending on the setting of “Dynamic EQ®” (vpage 58) and “Dynamic Volume®” (vpage 58).

When “Dynamic EQ” and “Dynamic Volume” are

“ON”.

When “Dynamic EQ” is “ON” and “Dynamic Volume” is “OFF”.

oSleep timer indicator

This lights when the sleep mode is selected (vpage 43).

Q0ZONE2 indicator

This lights up when ZONE2 (separate room) power is turned on (vpage 46).

Q1Input mode indicators

Set the audio input modes for the different input sources (vpage 55).

Q2HDMI indicator

This lights when playing using HDMI connections.

Q3Tuner reception mode indicators

These light according to the reception conditions when the input source is set to “HD Radio”.

STEREO : In the FM mode, this light when receiving stereo broadcasts.

TUNED : Lights when the broadcast is properly tuned in.

AUTO : This light when in the auto tuning mode.

Q4Decoder indicators

These light when the respective decoders are operating.

Q5HD indicator

This light during HD Radio reception.

When “Dynamic EQ” and “Dynamic Volume” are “OFF”.

78