Marantz SR6005 manual Nn When setting for input source, Nn When setting for zone Main Zone / ZONE2

	SVENSKA	NEDERLANDS
Setting items	Setting details
GUI	TUNER : Set the tuner screen display time when the input source is
(Continued)	“SIRIUS” or “HD Radio”.
	• Always : Show display continuously.
	• 30sec : Show display for 30 seconds after operation.
	• 10sec : Show display for 10 seconds after operation.
	OFF : Turn display off.
	iPod : Set the iPod screen display time when the input source is “USB/
	iPod”.
	• Always : Show display continuously.
	• 30sec : Show display for 30 seconds after operation.
	• 10sec : Show display for 10 seconds after operation.
	• OFF : Turn display off.
Zone Rename	• Up to 10 characters can be input.
Change the display title of	• For character input, see page 49.
each zone to one you prefer.
Trigger Out	Trigger Out
Select the condition for	nn When setting for zone (MAIN ZONE / ZONE2)
activating Trigger Out for
the input source, surround	Trigger out is activated through linkage to the power of the zone set
	to “ON”.
mode, etc.
	nn When setting for input source
See “DC OUT (TRIGGER
OUT) jacks” (vpage 41) for	Activate trigger out when the input source set to “ON” is selected.

more information on trigger	Active for the zone set to “ON” with “When Setting for Zone”.
out.
	• ON : Activate trigger on this mode.
	• – – – : Do not activate trigger on this mode.
	Default : The “Trigger Out” settings are returned to the default settings.
	• Yes : Reset to the defaults.
	• No : Do not reset to the defaults.

ESPAÑOL	ITALIANO	FRANÇAIS	DEUTSCH	ENGLISH
				Manual Setup
Setting items		Setting details
Display	ON : Display is always on.
Set the display on/off	Display Auto OFF : Display is off except
setting.	when showing the status display.
	Display OFF : Display is always off.

This can also be set by pressing DISPLAY on the remote control unit or

main unit.

Each time DISPLAY is pressed, the setting is changed as shown below.

			ON		Display Auto Off
				Display OFF
Setup Lock	ON : Turn protection on.
Protect settings from	OFF : Turn protection off.
inadvertent change.		When canceling the setting, set “Setup Lock” to “OFF”.

NOTE

When “Setup Lock” is set to “ON”, the settings listed below can no longer be changed. Also, “SETUP LOCKED!” is displayed if you attempt to operate related settings.

· Menu operations	· Channel Level
· M-DAX	· MultEQ®
· Dynamic Volume®	· Dynamic EQ®

Simple version

Basic version

Advanced version

Information

Remote control operation	Move the cursor	Confirm the setting	Return to previous menu	67
buttons	(Up/Down/Left/Right)