Marantz SR6005 manual Input Mode, Rename, Source Level, Playback Mode

SVENSKA NEDERLANDS

Input Mode Default settings are underlined.

The input modes available for selection may vary depending on the input source.

Setting items		Setting details
Input Mode	Auto : Automatically detect input signal and perform playback.
Set the audio input modes	HDMI : Play only signals from HDMI input.
for the different input	Digital : Play only signals from digital input.
sources.	Analog : Play only signals from analog input.
	7.1CH IN : Only signals input from the 7.1CH INPUT terminal will be
	played back.
	• This can also be set by pressing A/D on the
	remote control unit.
	• Each time A/D is pressed, the setting is changed
	as shown below.
	Auto	HDMI	Digital	Analog
			7.1CH IN

•“HDMI” can be set for input sources for which “HDMI” is assigned at “Input Assign” (vpage 53).

•“Digital” can be set for input sources for which “Digital” is assigned at “Input Assign” (vpage 53).

•If the input source is set to “TV” or “Game”, it cannot be set to “Analog”.

•When digital signals are properly input, the indicator lights on

the display. If the indicator does not light, check the digital input connector assignment and the connections.

•The surround mode cannot be set if the input mode is set to “7.1CH IN”.

•If “HDMI Control” is set to “ON” and a TV compatible with the ARC is connected via the HDMI OUT connectors, the input mode whose input source is “TV” is fixed to ARC.

Decode Mode				Auto : Detect type of digital input signal and decode and play automatically.
Set the decode mode for				PCM : Decode and play only PCM input signals.
input source.				DTS : Decode and play only DTS input signals.
	BD	DVD	VCR	• This item can be set for input sources for which “HDMI” or “Digital” is
	SAT	GAME	AUX1
				assigned at “Input Assign” (vpage 52).
	TV	CD	AUX2
				• Normally set this mode to “Auto”. Set “PCM” and “DTS” when
				inputting the corresponding input signal.

ESPAÑOL	ITALIANO		FRANÇAIS	DEUTSCH	ENGLISH
					Input Setup
Rename
Change the display name of the selected input source.
Setting items			Setting details
Rename		• Up to eight characters can be input.
Change the display name of		• For character input, see page 49.
the selected input source.
Default		Yes : Reset to the defaults.
The input source name		No : Do not reset to the defaults.

is returned to the default setting.

Source Level Default settings are underlined.

•This function corrects the playback level of the selected input source’s audio input.

•Make this setting if there are differences in the input volume levels between the different sources.

Setting details

–12dB – +12dB (0dB)

The analog input level and digital input level can be adjusted independently for input sources for which “HDMI” or “Digital” is assigned at “Input Assign“ (vpage 52).

Playback Mode

Make settings for repeat playback mode or random playback mode.

	Setting items			Setting details
	Repeat	nn For iPod playback
	Make settings for repeat	All : All files	are played repeatedly.
	mode.	One : A file	being played is		played repeatedly.
		OFF : Repeat playback mode is canceled.
	USB/iPod
		nn For USB memory device playback
		All : All files	are played repeatedly.
		One : A file	being played is		played repeatedly.
		Folder : A file in the folder			being played is played repeatedly.
Shuffle		nn For iPod playback
Make settings for shuffle		Songs : Shuffle songs.
mode.		Albums : Shuffle albums.
		OFF : Shuffle	playback	mode is		canceled.
	USB/iPod
		nn For USB memory device playback
		ON : Shuffle	playback	mode is		enabled.
		OFF : Shuffle	playback	mode is		canceled.

Simple version

Basic version

Advanced version

Information

Remote control operation	Move the cursor	Confirm the setting	Return to previous menu	55
buttons	(Up/Down/Left/Right)