Part I | Sounds and effects |
SOUND DSP
The SOUND DSP works like a studio effects pro- cessor, providing effects such as CHORUS, PHASER, DELAY and DISTORTION.
•There are five SOUND DSP groups, consisting of three for RIGHT 1, RIGHT 2 and LEFT, and two for the automatic accompaniment or
SEQUENCER.
1.In the CONDUCTOR or PART SELECT sec- tion, turn on the part to which this effect will be applied.
2.Press the SOUND DSP button to turn it on.
SOUND
DSP VARIATION
•You can turn on the VARIATION button to change the nuance of the effect.
•For the RIGHT 1, RIGHT 2 and LEFT parts, when the DIGITAL DRAWBAR is on, this but- ton is used to specify the tremolo effect type
(ROTARY SPEAKER/ROCK ROTARY).
Type and parameter settings
1.Press and hold the SOUND DSP button for a few seconds.
•The display changes to the following.
2.Use the PART ∧ and ∨ buttons to select the
SOUND DSP you wish to set.
•Only parts that can use the SOUND DSP can be selected.
5.Use the DEPTH ∧ and ∨ buttons to set the depth of the effect.
•The depth does not change for some types.
•This display can also be accessed from the REVERB & EFFECT MENU display. (Refer to page 162.)
EFFECT EDIT
The effects can be edited and then stored in a memory.
•MEMORY LIST is used to store all SOUND DSP groups.
1.Select an effect type to use as a base.
2.Press the EDIT button.
•The display changes to the following.
3.Use the PARAMETER ▲ and ▼ buttons to select the parameter.
•Parameters with a (V) mark are effective when the VARIATION button is turned on.
4.Use the VALUE ∧ and ∨ buttons to adjust the setting.
5.Press the NAMING button and assign a name to the effect, if necessary.
• Refer to page 66 for details about the NAMING procedure.
6.Use the EFFECT MEMORY ▲ and ▼ buttons to specify the location in which to store the edited effect.
Sounds and effects
3.Use the ∧ and ∨ buttons to select an effect group.
•The EFFECT MEMORY is for edited effects (see below).
4.Use the buttons to the left and right of the display to select the type.
•If the types comprise more than one display “page,” use the PAGE buttons to switch pages.
7.Press the WRITE button.
•The parameters vary depending on the effect type selected as the base.
43
