Part IV | Sequencer |
Sequencer Play
Play back your recorded performance.
1.Press the SEQUENCER PLAY button to turn it on.
SEQUENCER
PLAY | EASY REC |
•The display looks similar to the following.
2.Use the SONG ∧ and ∨ button to select the song number you wish to play back.
3.Use the balance buttons below the display to show “PLAY” above the track numbers you wish to have played back.
•Highlighted track numbers indicate tracks that are already recorded. Only highlighted track numbers can be selected for playback.
•You can select two or more tracks to play back at one time.
4.Press the SEQUENCER RESET (FILL IN 1) button.
•The SEQUENCER returns to the beginning of the song and the beginning panel settings are recalled.
5.To begin playback from a measure other than measure 1, use the MEAS ∧ and ∨ buttons to specify the beginning measure.
•“MEASURE=” indicates the current measure number.
6.Press the START/STOP button.
•The recorded performance is played back from the specified measure.
•When playback is begun from a measure in which an INTRO, COUNT INTRO, FILL IN or ENDING is recorded, the corresponding func- tion does not work.
•You can press the MIXER button and modify the settings for each part.
•For information about LYRICS, refer to page 128.
7.To stop playback, press the START/STOP but- ton.
•If the START/STOP button is pressed again, playback will continue from the point it was interrupted.
8.When you are finished playing back your per- formance, press the SEQUENCER PLAY but- ton to turn it off.
If a rhythm progression has been recorded in the RHYTHM (RHY) part, the MEASURE dis- play used in the STEP RECORD and EDIT dis- plays conforms to the time signature data stored in the RHYTHM part.
Adjusting the playback tempo
Even with a song having recorded tempo data, you can use TEMPO/PROGRAM or TAP TEMPO to adjust the tempo to your liking.
•When the tempo is changed, all the tempo data of that song is automatically changed by the same ratio. Accordingly, even in song data in which tempo change data is stored, a single adjustment of the tempo produces a
•To return to the original tempo, while the song is stopped press the SEQUENCER RESET button. Note that the tempo change is also canceled when you switch to another song or load a new song.
•The adjusted tempo is canceled when you begin the recording procedure and the original tempo data will be recorded.
83
Sequencer
