Symptoms which appear to be signs of trouble
The following changes in performance may occur in the Technics Keyboard but do not indicate trouble.
| Phenomenon |
| Remedy |
|
|
|
|
| |||
| The buttons, keys, etc. malfunction. | • Turn off the POWER button once, then turn it on again. | |||
|
| If this procedure is not successful, turn off the POWER | |||
|
| button once. Then, while pressing the three lower left | |||
|
| buttons in the RHYTHM GROUP section (60’s & 70’s, | |||
|
| MODERN DANCE and SOUL & R&B) at the same | |||
|
| time, turn the POWER button on again. (Note that, in | |||
|
| this case, all programmable settings, functions and | |||
|
| memories return to their | |||
|
|
| |||
| No sound is produced when the keys are pressed. | • The MAIN VOLUME is at the minimum setting. Adjust | |||
|
| the volume with the MAIN VOLUME control. | |||
|
| • The volumes for the selected parts are set to the | |||
|
| minimum levels. Use the balance buttons to set the | |||
effects |
| volumes of the relevant parts to appropriate levels. | |||
| (Refer to page 29.) |
|
| ||
| • The part is muted. (Refer to page 29.) |
| |||
and |
| • The LOCAL CONTROL for a part performed on the | |||
| keyboard is set to OFF. Set the LOCAL CONTROL to | ||||
Sounds |
| ||||
| ON. (Refer to page 190.) |
|
| ||
|
|
|
|
| |
Only percussive instrument sounds are produced | • In the | SOUND GROUP section, | the | DRUM KITS | |
when the keyboard is played. | button is on. |
|
| ||
|
|
| |||
|
|
| |||
| The volume is very low when the keyboard is | • The volume setting in the SEQUENCER contents is | |||
| played. | very low. Follow the INITIAL procedure to reset the | |||
|
| settings. (Refer to page 197.) |
|
| |
|
|
|
|
|
|
| The sound you hear is different from the sound you | • This | sometimes occurs when | you | play back |
| selected. | SEQUENCER or COMPOSER data which was created | |||
|
| on a different model, or when MIDI data is received | |||
|
| from a connected instrument. Select the desired | |||
|
| sounds again. |
|
| |
|
|
| |||
| The rhythm does not start. | • The DRUMS volume is set to the minimum level. Use | |||
|
| the balance buttons to set the DRUMS volume to an | |||
|
| appropriate level. |
|
| |
Rhythm |
| • A SEQUENCER PLAY button is on. When you are | |||
| not playing back the SEQUENCER performance, turn | ||||
| off the SEQUENCER PLAY button. |
|
| ||
| • CLOCK is set to MIDI. Set CLOCK to INTERNAL. | ||||
|
| ||||
|
| (Refer to page 191.) |
|
| |
|
|
| |||
AUTO PLAY CHORD | No sound is produced for the automatic accom- | • An ACCOMP part does not sound if its corresponding | |||
paniment, or only the sounds of some parts are | volume is set to the minimum level. Use the respective | ||||
produced. | balance buttons to set the ACCOMP 1– 5 volumes to | ||||
| appropriate levels. |
|
| ||
|
|
|
|
| |
|
|
| |||
| Storage is not possible. | • The remaining memory capacity of the SEQUENCER | |||
SEQUENCER |
| is 0. Follow the SONG CLEAR or TRACK CLEAR | |||
| procedure to erase the memory. (Refer to page 97.) | ||||
|
| ||||
The playback measure indication is different from | • The number of measures corresponds to the time | ||||
when the performance was recorded. | signature of the rhythm selected at the start of | ||||
| recording. To change the rhythm in the middle of the | ||||
| song, record the rhythm change in the RHYTHM part. | ||||
|
| ||||
|
| (Refer to page 94.) |
|
| |
|
|
|
|
|
|