Part VIII | Sound |
Separate Setting
You can output a desired part or parts through the two
1.On the SOUND MENU display, select SEPA-
RATE SETTING.
•The display looks similar to the following.
2.Use the MODE button to select desired output mode.
OFF:
The SUB OUT terminals are not used.
STEREO:
The SUB OUT terminals are used as a two- channel stereo output device.
MONO x 2:
The SUB OUT terminals are used as two monaural output devices.
SUB OUT terminals.
3.Use the PART ASSIGN button to select the part or parts for output.
•The parts can be selected differ depending on the modes (STEREO/MONOx2).
•If you select the MONOx2 mode, the same part can not be selected for both SUB OUT 1 and 2.
4.Use the “With MAIN OUT” button to specify whether the MAIN OUT terminal is also used for output (OFF/ON).
5.Use the EXPRESSION button to specify whether the EXPRESSION effect is effective for output (OFF/ON).
•For a detailed explanation of the SUB OUT terminals, refer to page 200.
Sound
APC Reverb Setting
Although an appropriate REVERB is applied for the automatic accompaniment parts depending on the rhythms by default, you can adjust the REVERB level for each part.
1.On the SOUND MENU display, select APC REVERB SETTING.
•The display looks similar to the following.
2.Use the PART ▲ and ▼ buttons to select the part, the DEPTH ∧ and ∨ buttons to set the value (PRESET IN RHYTHM, 0 – 127).
•PRESET IN RHYTHM is an optimal preset value for each rhythm for use with the APC Reverb Setting.
161
