Part I | Sounds and effects |
Effects (GLOBAL)
You can apply effects to the whole instrument.
Sounds and effects
REVERB
REVERB applies a reverberation effect to the sound.
Press the REVERB button to turn it on.
REVERB
Type and parameter settings
1.Press and hold the REVERB button for a few seconds.
•The display changes to the following.
2.Use the ∧ and ∨ buttons to select an effect group.
•The EFFECT MEMORY is an edited effect group.
3.Use the buttons to the left and right of the display to select a type.
4.Use the TOTAL DEPTH ∧ and ∨ buttons to set the depth of the effect.
•This display can also be accessed from the REVERB & EFFECT MENU display. (Refer to page 162.)
DETAIL EDIT
Your edited effect can be stored in a memory for later recall.
•The procedure is the same as for SOUND DSP. (Refer to page 43.)
CHORUS
Add breadth to the sound.
Press the CHORUS button to turn it on.
CHORUS
Type and parameter settings
1.Press and hold the CHORUS button for a few seconds.
•The display looks similar to the following.
2.Use the ∧ and ∨ buttons to select the name of the effect group.
•EFFECT MEMORY is an edited effect group.
3.Use the buttons to the left and right of the display to select a type.
DETAIL EDIT
Your edited effect can be stored in a memory for later recall.
•The procedure is the same as for SOUND DSP. (Refer to page 43.)
44
