Panasonic SX-KN7000 Error messages, Contents, Sequencer Data, Composer pattern

Error messages

No.	Contents
00	The data on the disk that you are using
	is for a different product.
	An error has occurred while the disk was
01	loading.
	Please try again!
02	There is no disk in the Disk Drive.
03	The file that you tried to load is empty.
	An error has occurred while the disk was
05	saving.
	Please try again!
	The disk that you are using is write
06	protected.
	Please remove the write protection and
	try again.
07	The disk that you are using is full. Please
	use another disk.
	An error has occurred while the disk was
08	formatting. The disk that you are using
	may be faulty.
	Please try formatting another disk.
10	The data is already copy protected.
15	The song you are trying to save is empty.
	This STANDARD MIDI FILE is incom-
16	patible with this instrument and cannot
	be loaded.
17	This is not a STANDARD MIDI FILE.
	The timebase (PPQ resolution) that you
18	tried to load is not 24/48/96/192/288/384
	PPQ.
	A problem has occurred with your
20	SEQUENCER Data.
	This might be due to a damaged or faulty
	disk.
21	Memory full
22	It is necessary to press REC STOP to
	complete this procedure.
	It is impossible to change the time
23	signature because it has already been
	set in the existing tracks.
	A rhythm track already exists. It is
24	impossible to assign two tracks to
	rhythm.
	It is only possible to change the velocity
25	on a melody track.

No.			Contents
	It is only possible to merge melody
26	tracks.
	Tracks such as rhythm, chord and
	control cannot be merged.
	It is only possible to copy melody tracks.
27	Tracks such as rhythm, chord and
	control cannot be copied.
28	This song is too long to be saved as a
	MIDI file.
	The MIDI file that you have tried to load
	exceeds the memory capacity of this
29	instrument and cannot be played. The
	SEQUENCER		memory		has been
	cleared.
	It is not possible to change the time
	signature of a COMPOSER pattern after
30	it has been recorded. If you want to
	proceed, you must first clear the entire
	COMPOSER pattern.
	The time signature of the pattern from
	which you are copying is different from
	the COMPOSER memory that you are
31	using.
	Either: Change the time signature
		of the COMPOSER memory
	or:	Copy from a pattern that has
		the same time signature
32	Memory full
	Select a Track before setting
33	parameters		for	AUTO	PUNCH
	RECORD.
	The file that you are trying to load was
43	saved on a previous KN keyboard. It is
	only possible to load using the
	“PERFORMANCE” option.
	It is impossible to edit a Drum Kit. Please
44	select a different sound from any group
	except Keyboard Percussion.
	It is only possible to insert MELODY
46	Tracks.	Tracks		such as	RHYTHM,
	CHORD and CONTROL cannot be
	inserted.
	This procedure is not possible with a
47	composer pattern or the metronome.
	Please select a preset rhythm pattern.
	It is not possible to record using preset
54	banks, compile banks, or control banks.
	Please select one of the user banks.

203

QQTG0671