Part X | Sound Edit |
ENVELOPE
Specify how the volume changes over time, from the time the key is played to the time the sound dies out.
1.Use the PAGE buttons to view the 2/3 display.
• The display looks similar to the following.
2.Use the buttons to the left of the display to select a tone.
3.Adjust the settings for the volume envelope.
• Use the buttons below the display to set the corresponding values. The envelope is created on the display as you input the set-
tings.
• Use the SUSTAIN PEDAL ∧ and ∨ buttons to select the type of sustain.
LONG:
Extend the release time of the sound. HOLD:
Maintain the
4.Repeat steps 2 and 3 for the other tones, as desired.
ENVELOPE TOUCH & KEY FOLLOW
Specify how the volume changes relative to touch or note pitch over time.
1.Use the PAGE buttons to view the 3/3 display.
2. Use the buttons to the left of the display to select a tone.
3. Use the TOUCH ∧ and ∨ buttons to change the touch settings.
• Use the ATK ∧ and ∨ buttons to specify the ATTACK time change depending on touch. Use the DCY ∧ and ∨ buttons to specify the DECAY time change depending on touch.
• At a – setting, the softer the keys are pressed, the greater the change. At a + setting, the harder the keys are pressed, the greater the change.
4. Change the key follow settings for the AT- TACK, DECAY and RELEASE.
• Use the ∧ and ∨ buttons corresponding to the ENVELOPE KEY FOLLOW attributes to adjust the settings. Use the RANGE buttons to specify the keyboard range.
Sound Edit
173
